Skip to main content

Pipe Saddles & Shields

 To view the  full catalogue details of each part, please click on the product image

 TYPE                                 DESCRIPTION  

 PART NUMBER          


 

 Figure 265GS Insulation Shield   The Figure 265GS is designed to support insulated pipe
and prevent crushing of the insulation at the point of
support. This item is usually used with our Figure 100
Clevis Hanger.
 

Figure 265GS 

 Figure 265P Insulation Shield   The Figure 265P is designed to protect the insulation and
distribute the load at the hanger point. This item is usually
used with our Figure 100 Clevis Hanger.
 

Figure 265P

 Figure 265CVB Iron Pipe Insulation Shield   Both the Figure 265CVB and 365CVB are designed to insulate
the pipe and tubing for thermal efficiency as well as to provide a
vapor barrier to prevent moisture condensation after installation.
Both products are comprised of a polyurethane insulation, an outer
wrapper and a galvanized steel shield. Recommended for an
operating temperature range of –200° F (-129° C) to +250° F
(121° C).
 

Figure 265CVB

 Figures 351-357Z Pipe-Covering Protection Saddles  

Figures 351 to 357APCP saddles are used to protect the
insulation against damage and keep heat loss to a minimum.
They are designed for from 1" up to 5" of covering. All
Saddles are 12" long with three tabs on each side for welding to pipe.
Sizes 12" and larger have a welded in center rib.

 

 

Figures 351-357Z

 Figure 465CVB High-Temperature Pipe Insulation Shield   The Figure 465CVB is designed to insulated the pipe for
thermal efficiency. It is comprised of a calcium silicate
insert resting on an outer wrapper and a galvanized steel
shield. Recommended for an operating temperature range
of +250° F (+121° C) to +1200° F (+648° C).
 

Figure 465CVB